FOR VEHICLES EQUIPPED WITH JBL The interface can be configured to work with hundreds of different vehicles simply by selecting the correct lead and adjusting the dip switches - making it a versatile tool for fast installations. This advanced CAN-Bus interface also provides switched live, illumination, speed pulse and reverse wires to make stereo/navigation installation easier.
Alfa Romeo Steering Wheel Interface with Mid / High Blaupunkt head units Can Bus compatible with the following vehicles: Alfa Romeo 156: 2000 onwards Alfa Romeo 147: 2000-2007 Alfa Romeo GT: 2004 onwards All Cars With CAN-Bus Steering Controls Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.
Suitable for the following Alfa Romeo vehicle: Alfa Romeo Mito (2008 onwards) with CAN BUS Steering Wheel Control Stalk Control Adaptors allows customers to use existing OEM steering wheel controls with a aftermarket head unit like Pioneer, Kenwood, Sony, Alpine and JVC.
-if you have the factory i Pod adapter that uses the CD changer port (non text) the conector behind the radio must be put back to stock before the Sat Pass is installed.
Audi A4 2007 2008 with factory installed RNS-E Navigation Radio -see AUDI-SAT-PASS-3.
(retained accessory power) Provides NAV outputs (parking brake reverse speed sense) Retains audio controls on the steering wheel Retains RSE (rear seat entertainment) Retains SAT (satellite radio) Retains SYNC Retains the factory AUX-IN jack Can be used in both non-amplified and amplified models (including Sony/THX) Retains balance and fade (excluding Sony/THX)Provides accessory power (12-volt 10-amp) Retains R. These interfaces plug into the CD Changer input of the unit and will disable CD changer connectivity.
(retained accessory power) Provides NAV outputs (parking brake / reverse / speed sense) Designed for non-amplified models / analog amplified models / or when bypassing a factory amplifier Retains fade and balance Retains chimes through an onboard speaker Designed for non-amplified models / analog amplified models / or when bypassing a factory amplifier Retains fade and balance FEATURES AND BENIFITS ● Plug and play, no cutting of wires required ● Allows connection of any audio device with 3.5mm headphone or RCA socket ● Direct audio input, superior sound quality to an FM Modulator2x RCA Audio input allowing the use of an external audio source such as an i POD, MP3 player with your factory car stereo.Features & Benefits Allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel controls Safety: Allows you to keep your hands on the steering wheel and eyes on the road.Plug and play, no cutting of wires required Maintains the original features of the vehicle such as date, time and temperature display Choose the relevant head unit connection lead according to the make of aftermarket head unit you wish to fit For interfaces where phone buttons are supported, the following brands allow pick up/hang up in Bluetooth mode: Alpine, Clarion, Kenwood, Pioneer and Zenec.It consist of two parts and both must be purchased together. Choose Radio Patch Lead to Complete kit Should fit Alpine Radios - 7513, 7514, 7515, 7521, 7804, 7805, 7807, 7817, 3daw880, 3daw882, 3de7886, CDA-7831, CDA-7837, CDA-7838, CDA-7839, CDA-7840, CDA-7842, CDA-7843, CDA-7844, CDA-7845, CDA-7850, CDA-7850R, CDA-7852, CDA-7865, CDA-7872, CDA-7944, CDA-9805, CDA-9807, CDA-9811, CDA-9821, CDA-9823, CDA-9825, CDA-9827, CDA-D852, CDA-D855, CDA-D857, CDE-228, CDE-7820, CDE-7825, CDE-7826, CDE-7826P, CDE-7828, CDE-7830, CDE-7830S, CDE-7831, CDE-7853, CDE-7854, CDE-7855, CDE-7856, CDE-7859, CDE-7860, CDE-7870, CDE-7872, CDE-9801, CDE-9802, CDE-9803, CDE-9821, CDE-9822, CDM-787S, CDM-7829, CDM-7833, CDM-7834, CDM-7835, CDM-7838, CDM-7854, CDM-7856, CDM-7857, CDM-7859, CDM-7861, CDM-7870, CDM-7871, CDM-7874, CDM-7876, CDM-7892, CDM-9801, CDM-9803, CDM-9805, CDM-9807, CDM-9811, CDM-9821, CDM-9822, CDM-9823, CDM-9825, MDA-7755, TDA-7561, TDA-7562, TDA-7570, TDA-7572, TDA-7587, TDA-7588, TDM-754S, TDM-7515, TDM-7522, TDM-7533, TDM-7534, TDM-7544, TDM-7545, TDM-7555, TDM-7574, TDM-7580, TDM-7581, TDM-7582, TDM-7583, TDM-7585 Should fit Alpine Radios - CDA-7862, CDA-7863, CDA-7864, CDA-7873, CDA-7875, CDA-7876, CDA-7878, CDA-7892, CDA-7893, CDA-7894, CDA-7896, CDA-7897, CDA-7965, CDE-9827, CDE-9828, CDE-9841, CDE-9843, CDE-9845, CDE-9870, CDE-9872, CDE-9873, CDE-9874, CDE-9874L, i DA-X100, i DA-X100M, i DA-X200, i DA-X300, Compatible with CDE-7854R, CDE-7854RM, CDE-7855RB, CDE-7857RB, CDE-228, CDE-7820, CDE-7853R, CDE-7860R, CDE-9801R, CDE-9802RB, CDM-7838R, CDM-7856RB, CDM-7858RB, CDM-7859RB, CDA-9815RB, CDA-9813R, CDA-9812R, CDA-9812RR, CDA-9812RB, CDA-9811R, CDA-7990R, CDA-7944R, CDA-78, CDA-7894RB, CDA-7893R, CDA-7878R, CDA-7876RB, CDA-7875RB, CDA-7873R, CDA-7865R, CDA-7852R, CDA-7850R, CDA-7842RAlpine 16 Pin - ISO.Compatible with CDA-98* Series, CDE-9827RR, CDE-9828RB, CDE-9841/43/45, CDE-9846R/Rm, CDE-9848R, CDE-9850Ri, CDE-9870R/Rr, CDE-9871R/Rm, CDE-9873Rb, CDE-9881Rr/b, CDM-7837R, CDM-7857RB, CDM-7870R, CDM-7871RM, CDM-7872RB, CDM-874RB, CDM-9823R/RR, CDM-9825RB, CMD-7835R, CTA-1502R, CTA-1505R, CVA-1003R, CVA-1014R/RB, DVA-9860R, DVA-9861Ri, DVA-9965R, i DA-X001, IVAD range, Nva-N033R, TDA series, TDM series Connects2 CT21AL06 Replacement Harness for Alpine ' INE' Head Units This OEM cable plugs directly into Alpine INE navigation aftermarket car audio systems.Provides accessory power (12-volt 10-amp) Retains R. The infodapter allows vehice information to be displayed on any aftermarket AV head unit.